Commit 836978e9 authored by Praetorius, Simon's avatar Praetorius, Simon
Browse files

removed all trailing whitespaces in all git files

parent 5f0ca3b5
......@@ -8,7 +8,7 @@
<body>
<h1> Using AMDiS with cmake </h1>
With this short page, I will show you, how to use the cmake buildsystem with AMDiS. The introduction consists of two main parts:
<ol>
<ol>
<li> <a href="#compiling" > compiling and installing AMDiS with CMake </a ></li>
<li> <a href="#using" > using the cmake installed AMDiS in your project </a ></li>
<li> <a href="#faq" > some frequently asked questions </a ></li>
......@@ -37,7 +37,7 @@ cd ${HOME}/work/amdis_build </pre>
The simplest configuration of AMDiS, i.e. without umfpack and parallelization, only sets the install destination to the directory "${HOME}/programs/". To do this, you have to call cmake with your install destination and the AMDiS source directory as commandline arguments
<pre class="desc" >
cmake -DCMAKE_INSTALL_PREFIX=${HOME}/programs/ ../amdis/AMDiS</pre>
Compilation and installation is the same as with automake/autoconf:
<pre class="desc">
make && make install </pre >
......@@ -80,7 +80,7 @@ and we have to tell cmake, that we need the library amdis and each library amdis
target_link_libraries(fooProg ${AMDIS_LIBRARIES})
</pre >
If cmake does not find AMDiS, you have to set the variable AMDIS_DIR to the directory containing the file AMDiSConfig.cmake. This file resides in
If cmake does not find AMDiS, you have to set the variable AMDIS_DIR to the directory containing the file AMDiSConfig.cmake. This file resides in
<pre class="desc" >
${CMAKE_INSTALL_PREFIX}/share/amdis/
</pre >
......
set(COMPILER_TEST_DIR ${CMAKE_BINARY_DIR}/CMakeFiles/compilerTest)
file(WRITE ${COMPILER_TEST_DIR}/CMakeLists.txt
file(WRITE ${COMPILER_TEST_DIR}/CMakeLists.txt
"project(compilerTest)
cmake_minimum_required(VERSION 2.8)
add_definitions(-std=c++11)
......@@ -28,25 +28,25 @@ file(WRITE ${COMPILER_TEST_DIR}/CMakeLists.txt
# RANGE-BASED FOR LOOPS
add_executable(test_range_based_for test_range_based_for.cpp)
target_link_libraries(test_range_based_for)")
file(WRITE ${COMPILER_TEST_DIR}/test_variadic_templ_class.cpp
file(WRITE ${COMPILER_TEST_DIR}/test_variadic_templ_class.cpp
"template<class... Ts> struct A{}; int main(){A<int, double> a;}")
file(WRITE ${COMPILER_TEST_DIR}/test_variadic_templ_fct.cpp
file(WRITE ${COMPILER_TEST_DIR}/test_variadic_templ_fct.cpp
"template<class... Ts> void foo(Ts... ts){}; int main(){foo(1, 2.0, 3.0f);}")
file(WRITE ${COMPILER_TEST_DIR}/test_alias_templates.cpp
file(WRITE ${COMPILER_TEST_DIR}/test_alias_templates.cpp
"template<class T> struct A{}; template<class T> using B=A<T>; int main(){B<int> b;}")
file(WRITE ${COMPILER_TEST_DIR}/test_decltype.cpp
file(WRITE ${COMPILER_TEST_DIR}/test_decltype.cpp
"int main(){decltype(1) a = 1;}")
file(WRITE ${COMPILER_TEST_DIR}/test_auto.cpp
file(WRITE ${COMPILER_TEST_DIR}/test_auto.cpp
"int main(){auto a = 1;}")
file(WRITE ${COMPILER_TEST_DIR}/test_constexpr.cpp
file(WRITE ${COMPILER_TEST_DIR}/test_constexpr.cpp
"constexpr int foo(){return 1;}; int main(){static constexpr int f = foo();}")
file(WRITE ${COMPILER_TEST_DIR}/test_delegating_constructors.cpp
file(WRITE ${COMPILER_TEST_DIR}/test_delegating_constructors.cpp
"struct A{ A(){} A(int) : A(){} }; int main(){ A a(1);}")
file(WRITE ${COMPILER_TEST_DIR}/test_range_based_for.cpp
file(WRITE ${COMPILER_TEST_DIR}/test_range_based_for.cpp
"int main(){ int vec[10]; for (int& elem : vec) { elem = 1; } }")
set(COMPILER_CXX11_FEATURES "")
try_compile(TEST_VARIADIC_TEMPL_CLASS ${COMPILER_TEST_DIR} ${COMPILER_TEST_DIR} compilerTest test_variadic_templ_class)
......
#!/bin/sh
if test "$1" = "upgrade" ; then
if test "$1" = "upgrade" ; then
exit 0
fi
NEWDIRS_SEMI="@deb_add_dirs@"
......
......@@ -2,7 +2,7 @@ if (ENABLE_PARALLEL_DOMAIN)
option(ENABLE_ZOLTAN "Add support for the Parallel Partitioning suite Zoltan" false)
option(ENABLE_PARALLEL_SOLVERS "Add some problem dependent solver, e.g. Feti, Navier-Stokes and Cahn-Hilliard" true)
mark_as_advanced(ENABLE_PARALLEL_SOLVERS)
add_library(amdis_parallel INTERFACE)
target_sources(amdis PRIVATE
${SOURCE_DIR}/parallel/DofComm.cc
......@@ -21,14 +21,14 @@ if (ENABLE_PARALLEL_DOMAIN)
${SOURCE_DIR}/parallel/ParMetisPartitioner.cc
${SOURCE_DIR}/parallel/StdMpi.cc
)
target_sources(amdis_debug INTERFACE
${SOURCE_DIR}/parallel/ParallelDebug.cc
)
target_compile_definitions(amdis_parallel INTERFACE
HAVE_PARALLEL_DOMAIN_AMDIS=1)
# MPI is required
find_package(MPI REQUIRED)
if (MPI_FOUND)
......@@ -37,15 +37,15 @@ if (ENABLE_PARALLEL_DOMAIN)
target_compile_options(amdis_parallel INTERFACE
${MPI_COMPILE_FLAGS})
endif (MPI_FOUND)
# PETSc library is required
set(PETSC_EXECUTABLE_RUNS ON)
include(find_petsc)
if (PETSc_FOUND)
target_include_directories(amdis_parallel INTERFACE
${PETSC_DIR}/include
${PETSC_DIR}/include
${PETSC_DIR}/${PETSC_ARCH}/include)
# parmetis is required
find_file(PARMETIS_HEADER_FILE "parmetis.h" HINTS ${PETSC_DIR}/include )
if (PARMETIS_HEADER_FILE)
......@@ -54,7 +54,7 @@ if (ENABLE_PARALLEL_DOMAIN)
else()
message(FATAL_ERROR "Could not find ParMetis header file 'parmetis.h'!")
endif (PARMETIS_HEADER_FILE)
# add support for the zoltan library
if (ENABLE_ZOLTAN)
find_file(ZOLTAN_HEADER_FILE "zoltan_cpp.h" HINTS ${PETSC_DIR}/include)
......@@ -64,18 +64,18 @@ if (ENABLE_PARALLEL_DOMAIN)
else()
message(FATAL_ERROR "Could not find Zoltan include file 'zoltan_cpp.h'!")
endif(ZOLTAN_HEADER_FILE)
target_compile_definitions(amdis_parallel INTERFACE HAVE_ZOLTAN=1)
target_sources(amdis PRIVATE
${SOURCE_DIR}/parallel/ZoltanPartitioner.cc)
endif (ENABLE_ZOLTAN)
if (ENABLE_BDDCML)
target_compile_definitions(amdis_parallel INTERFACE HAVE_BDDCML=1)
target_sources(amdis PRIVATE
${SOURCE_DIR}/parallel/BddcMlSolver.cc)
endif (ENABLE_BDDCML)
# add some more source-files that need petsc
target_sources(amdis PRIVATE
${SOURCE_DIR}/parallel/MatrixNnzStructure.cc
......@@ -86,7 +86,7 @@ if (ENABLE_PARALLEL_DOMAIN)
${SOURCE_DIR}/parallel/PetscSolverGlobalBlockMatrix.cc
${SOURCE_DIR}/solver/PetscTypes.cc
)
if (ENABLE_PARALLEL_SOLVERS)
target_sources(amdis PRIVATE
${SOURCE_DIR}/parallel/PetscSolverFeti.cc
......@@ -103,23 +103,23 @@ if (ENABLE_PARALLEL_DOMAIN)
target_compile_definitions(amdis_parallel INTERFACE
HAVE_PARALLEL_SOLVERS=1)
endif (ENABLE_PARALLEL_SOLVERS)
target_compile_definitions(amdis_parallel INTERFACE
HAVE_PARALLEL_PETSC=1
PETSC_VERSION=${PETSC_VERSION})
target_link_libraries(amdis amdis_parallel ${PETSC_LIBRARIES} blas lapack)
endif (PETSc_FOUND)
# specify how to install this target:
# -----------------------------------
file(GLOB AMDIS_PARALLEL_HEADERS "${SOURCE_DIR}/parallel/*.h")
install(FILES ${AMDIS_PARALLEL_HEADERS} DESTINATION include/amdis/parallel/)
install(FILES
${BASE_DIR}/cmake3/ResolveCompilerPaths.cmake
${BASE_DIR}/cmake3/FindPackageMultipass.cmake
install(FILES
${BASE_DIR}/cmake3/ResolveCompilerPaths.cmake
${BASE_DIR}/cmake3/FindPackageMultipass.cmake
${BASE_DIR}/cmake3/find_petsc.cmake
DESTINATION share/amdis/)
endif (ENABLE_PARALLEL_DOMAIN)
......@@ -2,7 +2,7 @@
set(MUPARSER_SOURCE_DIR ${BASE_DIR}/lib/muparser_v134/src)
set(MUPARSER_INCLUDE_DIR ${BASE_DIR}/lib/muparser_v134/include)
add_library(muparser
add_library(muparser
${MUPARSER_SOURCE_DIR}/muParser.cpp
${MUPARSER_SOURCE_DIR}/muParserBase.cpp
${MUPARSER_SOURCE_DIR}/muParserBytecode.cpp
......@@ -13,7 +13,7 @@ add_library(muparser
${MUPARSER_SOURCE_DIR}/muParserInt.cpp
${MUPARSER_SOURCE_DIR}/muParserTest.cpp
${MUPARSER_SOURCE_DIR}/muParserTokenReader.cpp)
target_include_directories(muparser PUBLIC ${MUPARSER_INCLUDE_DIR})
if (ENABLE_CXX11)
......
......@@ -14,7 +14,7 @@ macro(test_compile_features RESULT_VAR TARGET SCOPE) # feature1 feature2 feature
else ()
set(DUMMY_FILE ${AMDIS_DIR}/dummy.cc)
endif ()
message(STATUS "Test for cxx11 features for target ${TARGET}")
execute_process(COMMAND ${CMAKE_COMMAND} -E make_directory ${_DIR})
file(WRITE ${_DIR}/CMakeLists.txt "
......
......@@ -38,20 +38,20 @@ PROJECT_NAME = AMDiS
# could be handy for archiving the generated documentation or if some version
# control system is used.
PROJECT_NUMBER =
PROJECT_NUMBER =
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer a
# quick idea about the purpose of the project. Keep the description short.
PROJECT_BRIEF =
PROJECT_BRIEF =
# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
# the documentation. The maximum height of the logo should not exceed 55 pixels
# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
# to the output directory.
PROJECT_LOGO =
PROJECT_LOGO =
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
# into which the generated documentation will be written. If a relative path is
......@@ -154,7 +154,7 @@ FULL_PATH_NAMES = NO
# will be relative from the directory where doxygen is started.
# This tag requires that the tag FULL_PATH_NAMES is set to YES.
STRIP_FROM_PATH =
STRIP_FROM_PATH =
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
# path mentioned in the documentation of a class, which tells the reader which
......@@ -163,7 +163,7 @@ STRIP_FROM_PATH =
# specify the list of include paths that are normally passed to the compiler
# using the -I flag.
STRIP_FROM_INC_PATH =
STRIP_FROM_INC_PATH =
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
# less readable) file names. This can be useful is your file systems doesn't
......@@ -230,13 +230,13 @@ TAB_SIZE = 8
# "Side Effects:". You can put \n's in the value part of an alias to insert
# newlines.
ALIASES =
ALIASES =
# This tag can be used to specify a number of word-keyword mappings (TCL only).
# A mapping has the form "name=value". For example adding "class=itcl::class"
# will allow you to use the command class in the itcl::class meaning.
TCL_SUBST =
TCL_SUBST =
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
# only. Doxygen will then generate output that is more tailored for C. For
......@@ -280,7 +280,7 @@ OPTIMIZE_OUTPUT_VHDL = NO
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
# the files are not read by doxygen.
EXTENSION_MAPPING =
EXTENSION_MAPPING =
# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
# according to the Markdown format, which allows for more readable
......@@ -616,7 +616,7 @@ GENERATE_DEPRECATEDLIST= YES
# sections, marked by \if <section_label> ... \endif and \cond <section_label>
# ... \endcond blocks.
ENABLED_SECTIONS =
ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
# initial value of a variable or macro / define can have for it to appear in the
......@@ -658,7 +658,7 @@ SHOW_NAMESPACES = YES
# by doxygen. Whatever the program writes to standard output is used as the file
# version. For an example see the documentation.
FILE_VERSION_FILTER =
FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
# by doxygen. The layout file controls the global structure of the generated
......@@ -671,7 +671,7 @@ FILE_VERSION_FILTER =
# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
# tag is left empty.
LAYOUT_FILE =
LAYOUT_FILE =
# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
# the reference definitions. This must be a list of .bib files. The .bib
......@@ -682,7 +682,7 @@ LAYOUT_FILE =
# search path. Do not use file names with spaces, bibtex cannot handle them. See
# also \cite for info how to create references.
CITE_BIB_FILES =
CITE_BIB_FILES =
#---------------------------------------------------------------------------
# Configuration options related to warning and progress messages
......@@ -741,7 +741,7 @@ WARN_FORMAT = "$file:$line: $text"
# messages should be written. If left blank the output is written to standard
# error (stderr).
WARN_LOGFILE =
WARN_LOGFILE =
#---------------------------------------------------------------------------
# Configuration options related to the input files
......@@ -798,7 +798,7 @@ RECURSIVE = NO
# Note that relative paths are relative to the directory from which doxygen is
# run.
EXCLUDE =
EXCLUDE =
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
......@@ -814,7 +814,7 @@ EXCLUDE_SYMLINKS = NO
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories for example use the pattern */test/*
EXCLUDE_PATTERNS =
EXCLUDE_PATTERNS =
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# (namespaces, classes, functions, etc.) that should be excluded from the
......@@ -825,20 +825,20 @@ EXCLUDE_PATTERNS =
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories use the pattern */test/*
EXCLUDE_SYMBOLS =
EXCLUDE_SYMBOLS =
# The EXAMPLE_PATH tag can be used to specify one or more files or directories
# that contain example code fragments that are included (see the \include
# command).
EXAMPLE_PATH =
EXAMPLE_PATH =
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
# *.h) to filter out the source-files in the directories. If left blank all
# files are included.
EXAMPLE_PATTERNS =
EXAMPLE_PATTERNS =
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude commands
......@@ -851,7 +851,7 @@ EXAMPLE_RECURSIVE = NO
# that contain images that are to be included in the documentation (see the
# \image command).
IMAGE_PATH =
IMAGE_PATH =
# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
......@@ -868,7 +868,7 @@ IMAGE_PATH =
# code is scanned, but not when the output code is generated. If lines are added
# or removed, the anchors will not be placed correctly.
INPUT_FILTER =
INPUT_FILTER =
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis. Doxygen will compare the file name with each pattern and apply the
......@@ -877,7 +877,7 @@ INPUT_FILTER =
# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
# patterns match the file name, INPUT_FILTER is applied.
FILTER_PATTERNS =
FILTER_PATTERNS =
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER ) will also be used to filter the input files that are used for
......@@ -892,14 +892,14 @@ FILTER_SOURCE_FILES = NO
# *.ext= (so without naming a filter).
# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
FILTER_SOURCE_PATTERNS =
FILTER_SOURCE_PATTERNS =
# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
# is part of the input, its contents will be placed on the main page
# (index.html). This can be useful if you have a project on for instance GitHub
# and want to reuse the introduction page also for the doxygen output.
USE_MDFILE_AS_MAINPAGE =
USE_MDFILE_AS_MAINPAGE =
#---------------------------------------------------------------------------
# Configuration options related to source browsing
......@@ -1011,7 +1011,7 @@ COLS_IN_ALPHA_INDEX = 5
# while generating the index headers.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
IGNORE_PREFIX =
IGNORE_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the HTML output
......@@ -1055,7 +1055,7 @@ HTML_FILE_EXTENSION = .html
# of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_HEADER =
HTML_HEADER =
# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
# generated HTML page. If the tag is left blank doxygen will generate a standard
......@@ -1065,7 +1065,7 @@ HTML_HEADER =
# that doxygen normally uses.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_FOOTER =
HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
# sheet that is used by each HTML page. It can be used to fine-tune the look of
......@@ -1077,7 +1077,7 @@ HTML_FOOTER =
# obsolete.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_STYLESHEET =
HTML_STYLESHEET =
# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user-
# defined cascading style sheet that is included after the standard style sheets
......@@ -1088,7 +1088,7 @@ HTML_STYLESHEET =
# see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_EXTRA_STYLESHEET =
HTML_EXTRA_STYLESHEET =
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
......@@ -1098,7 +1098,7 @@ HTML_EXTRA_STYLESHEET =
# files will be copied as-is; there are no commands or markers available.
# This tag requires that the tag GENERATE_HTML is set to YES.
HTML_EXTRA_FILES =
HTML_EXTRA_FILES =
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
# will adjust the colors in the stylesheet and background images according to
......@@ -1226,7 +1226,7 @@ GENERATE_HTMLHELP = NO
# written to the html output directory.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
CHM_FILE =
CHM_FILE =
# The HHC_LOCATION tag can be used to specify the location (absolute path
# including file name) of the HTML help compiler ( hhc.exe). If non-empty
......@@ -1234,7 +1234,7 @@ CHM_FILE =
# The file has to be specified with full path.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
HHC_LOCATION =
HHC_LOCATION =
# The GENERATE_CHI flag controls if a separate .chi index file is generated (
# YES) or that it should be included in the master .chm file ( NO).
......@@ -1247,7 +1247,7 @@ GENERATE_CHI = NO
# and project file content.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
CHM_INDEX_ENCODING =
CHM_INDEX_ENCODING =
# The BINARY_TOC flag controls whether a binary table of contents is generated (
# YES) or a normal table of contents ( NO) in the .chm file.
......@@ -1277,7 +1277,7 @@ GENERATE_QHP = NO
# the HTML output folder.
# This tag requires that the tag GENERATE_QHP is set to YES.
QCH_FILE =
QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
# Project output. For more information please see Qt Help Project / Namespace
......@@ -1302,7 +1302,7 @@ QHP_VIRTUAL_FOLDER = doc
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_NAME =
QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see Qt Help Project / Custom
......@@ -1310,21 +1310,21 @@ QHP_CUST_FILTER_NAME =
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_ATTRS =
QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
# project's filter section matches. Qt Help Project / Filter Attributes (see:
# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_SECT_FILTER_ATTRS =
QHP_SECT_FILTER_ATTRS =
# The QHG_LOCATION tag can be used to specify the location of Qt's
# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
# generated .qhp file.
# This tag requires that the tag GENERATE_QHP is set to YES.
QHG_LOCATION =
QHG_LOCATION =
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
# generated, together with the HTML files, they form an Eclipse help plugin. To
......@@ -1457,7 +1457,7 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_EXTENSIONS =
MATHJAX_EXTENSIONS =
# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
# of code that will be used on startup of the MathJax code. See the MathJax site
......@@ -1465,7 +1465,7 @@ MATHJAX_EXTENSIONS =
# example see the documentation.
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_CODEFILE =
MATHJAX_CODEFILE =
# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
# the HTML output. The underlying search engine uses javascript and DHTML and
......@@ -1525,7 +1525,7 @@ EXTERNAL_SEARCH = NO
# Searching" for details.
# This tag requires that the tag SEARCHENGINE is set to YES.
SEARCHENGINE_URL =
SEARCHENGINE_URL =
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
# search data is written to a file for indexing by an external tool. With the
......@@ -1541,7 +1541,7 @@ SEARCHDATA_FILE = searchdata.xml
# projects and redirect the results back to the right project.
# This tag requires that the tag SEARCHENGINE is set to YES.
EXTERNAL_SEARCH_ID =
EXTERNAL_SEARCH_ID =
# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
# projects other than the one defined by this configuration file, but that are
......@@ -1551,7 +1551,7 @@ EXTERNAL_SEARCH_ID =
# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
# This tag requires that the tag SEARCHENGINE is set to YES.
EXTRA_SEARCH_MAPPINGS =
EXTRA_SEARCH_MAPPINGS =
#---------------------------------------------------------------------------
# Configuration options related to the LaTeX output
......@@ -1612,7 +1612,7 @@ PAPER_TYPE = a4wide
# If left blank no extra packages will be included.
# This tag requires that the tag GENERATE_LATEX is set to YES.
EXTRA_PACKAGES =
EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
# generated LaTeX document. The header should contain everything until the first
......@@ -1628,7 +1628,7 @@ EXTRA_PACKAGES =
# PROJECT_NAME), or the project number (see PROJECT_NUMBER).
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_HEADER =
LATEX_HEADER =
# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
# generated LaTeX document. The footer should contain everything after the last
......@@ -1637,7 +1637,7 @@ LATEX_HEADER =
# Note: Only use a user-defined footer if you know what you are doing!
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_FOOTER =
LATEX_FOOTER =
# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the LATEX_OUTPUT output
......@@ -1645,7 +1645,7 @@ LATEX_FOOTER =
# markers available.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_EXTRA_FILES =
LATEX_EXTRA_FILES =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
......@@ -1745,14 +1745,14 @@ RTF_HYPERLINKS = NO
# default style sheet that doxygen normally uses.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_STYLESHEET_FILE =
RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an RTF document. Syntax is
# similar to doxygen's config file. A template extensions file can be generated
# using doxygen -e rtf extensionFile.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_EXTENSIONS_FILE =
RTF_EXTENSIONS_FILE =
#---------------------------------------------------------------------------
# Configuration options related to the man page output
......@@ -1813,13 +1813,13 @@ XML_OUTPUT = xml
# validating XML parser to check the syntax of the XML files.
# This tag requires that the tag GENERATE_XML is set to YES.
XML_SCHEMA =
XML_SCHEMA =
# The XML_DTD tag can be used to specify a XML DTD, which can be used by a
# validating XML parser to check the syntax of the XML files.
# This tag requires that the tag GENERATE_XML is set to YES.
XML_DTD =
XML_DTD =
# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
# listings (including syntax highlighting and cross-referencing information) to
......@@ -1896,7 +1896,7 @@ PERLMOD_PRETTY = YES
# overwrite each other's variables.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.
PERLMOD_MAKEVAR_PREFIX =
PERLMOD_MAKEVAR_PREFIX =
#---------------------------------------------------------------------------
# Configuration options related to the preprocessor
......@@ -1937,7 +1937,7 @@ SEARCH_INCLUDES = YES
# preprocessor.
# This tag requires that the tag SEARCH_INCLUDES is set to YES.
INCLUDE_PATH =